Details
This listing is for an inkjet print head cleaning and flush kit. Not for use on laser or toner printers. I am an industrial chemist by trade and have formulated a solvent blend which gives excellent cleaning performance for printer inkjets.
BUY 2 get the 3rd Kit for FREE !! You don't have to do anything when ordering 2 kits, the 3rd kit will be sent automatically to you!!
The kit includes the following;
1 x 25ml solution of specially formulated cleaner
1 x 10ml syringe
1 x 3mm diameter flexible plastic tubing
Typical directions for use: Put the printer into the cartridge change position. Then remove the blocked ink cartridge containing the blocked nozzle. Take up 2ml of the cleaner via the supplied syringe and add the attached 3mm diameter flexible plastic tubing. Place plenty of kitchen roll underneath the printer nozzle to capture the flushing solvent after cleaning. Attach the other end of the tubing to the blocked nozzle and gently squeeze the syringe, while holding the tube onto the nozzle. Squeeze through the entire 2ml, wipe up excess solvent with kitchen roll and allow to dry. Re-attach the printer cartridge and print a test page to check for bad printing and missing patterns. If patchy printing is still seen then repeat the procedure.
The supplied cleaner is enough for 10+ cleaning/flushing runs.
Packaging
The printer head flush kit solution will be supplied in a 25ml HDPE bottle and sent along with the syringe and plastic piping in a strong jiffy bag.
Happy Bidding.
